1 – 13 Inch Ford Racing Raised Logo Air Cleaner.
They are supplied with a genuine 3” Motorcraft® air filter elements (part no. FA612R) for maximum airflow. The air cleaner lid attaches to a short stud that is screwed into the center of the carburetor.
Fits under the hood for most Muscle Cars and Kit Cars.
13.25 L X 13.25 W 3.50 H
Lid has a threaded boss on the underside, and is simply spun into place by the installer. Each kit is supplied with necessary mounting hardware. Technical Note: After installing a new air cleaner, always lower the hood slowly to confirm sufficient clearance visually. Minimum clearance of 3-3/4” is required from the top of the carburetor gasket area to the underside of the hood. The air cleaner bases are recessed for a low profile appearance, maximum performance and hood clearance. Patent Pending.
Fits a standard 5 1/8 inch Diameter Carburetor or Throttle Body Neck.
* Minimum clearance of 3.75 in. is required from the top of the carburetor gasket area to the underside of the hood
13″ diameter air cleaner includes a standard drop base tray that hangs 3/4″ below the mounting surface of the carb/efi intake area. It is notched at both ends for fuel bowls giving additional clearance.